THIS IS THE WANT TO GO TO IT AND FIND OUT STIE!!!FOR MODELING LOCOMOTIVES RAIL CARS /TRUCK CARS /SCENERY ANDANY THING ELSE YOU THINK OF AND SHARE WITH THE OTHER MEMBERS AND MODELERS OF TRAINLIFE IF YOU HAVE THE KNOWLEDGE ON HOW TO MAKE IT EASIER FASTER OR... moreTHIS IS THE WANT TO GO TO IT AND FIND OUT STIE!!!FOR MODELING LOCOMOTIVES RAIL CARS /TRUCK CARS /SCENERY ANDANY THING ELSE YOU THINK OF AND SHARE WITH THE OTHER MEMBERS AND MODELERS OF TRAINLIFE IF YOU HAVE THE KNOWLEDGE ON HOW TO MAKE IT EASIER FASTER OR BETTER PLEASE SHARE IT WITH US THANKS!!
Just wanted to say to all my TL friends. Sorry, I haven't seemed like I have been active on TL but, I have, just as a spectator. I just don't have any new info. going on. I dont have any place to set up my H/O scale still. I haven't done any rail fannin' in awhile(cost of fuel v. amount of paycheck). I do read some post, look at pics, and watch some vids. I am still here. I am just quiet.
check out some of my vids on my elev. I just painted mine a flat white and then dusted it with grey primer to get weathered look. not all grain elev. can afford to paint there's as the cost of painting is in the range of 10 of thousands of dollars.
Hey everyone, work has kept me away from railroading in the last few months. However, I do have plans on redoing my layout, but I'm struggling with coming up with a track plan that I would be happy with. Right now I feel I'm not using my 10x20 room effectively. I could use ideas
Tyler Sneed the BNSF dude
Just purchased an Atlas mp15dc at a train show im having problems decoding it i have tried installing a digitrax ip decoder in it, there isn't any room in the shell for it, debating on a board replacement does anybody have any recommendations on what to do?
I'm interested in building some scratch structures from sheet styrene & while I've done some hack & splice work on kits I haven't built one direct from "imagination to layout".
The example I'll use is my Rockford mobile home project.
Ok here is an old trick to use on old paint like enamel I have used with great results on old Athearn Blue box Locomotives and Rolling stock
(brake fluid Dot3 form any auto parts store or Walmart etc) but be careful some plastics will warp get soft etc..
Owning a small fleet of Proto 2000 E7, E8 and Erie Built locomotives I have noticed that the coupler swing arms have excessive vertical play that causes unwanted uncouplings when the units are under load or consisted together. The locomotives are extremel
Decals i FOUND THE BEST TO USE IS MICROSCALE HAS ALL TYPES OF DECALS FOR YOUR HO SCALE NEEDS THEY HAVE THE FOLLOWING TYPES FOR (TRUCKS ,TRAILERS& CONTAINERS>
BUSINESS SIGNAGE/AND MOST RAIL ROADS 1ST CLASS-THE SMALL BRANCH LINES FOR LOCOMOTIVES R