John Warren's Album: Test bench voltage at work bench

Made my test bench a bit more convenient being I use various voltages from DCC, DC and wal warts to supply various lights around the layout,


3 comments
  • Graham Stokes and Mark Charles like this
  • Neal M
    Neal M Hi John. That's pretty neat. I have test track above my work bench. It has 3 tracks; one for DCC, one for DC and the back track for rolling stock. Front tracks has coupler height gauge on it as well...
    November 27, 2016 - 1 likes this
  • John  Warren
    John Warren My track above the work bench is almost the same, except my programming track is off a turnout with a dead section then the PG track, I use this track a a caboose siding when not programming.
    November 27, 2016
  • Neal M
    Neal M I have a programming track on this as well, plus I have one upstairs on the layout with a toggle switch so I can use the siding to hold an engine or program. I use the NCE Power Cab on the bench and one section on the layout.
    November 27, 2016