John Warren's Album: Static grass applicator

Photo 3 of 5 in Static grass applicator

Drilled three 1/4 inch holes in 1/4 inch plywood spacer. Being the handle of the strainer just touch's the wood, it holds everything in place very snug, this takes a bit of tweeeeeking LOL. One wire soldered to a leg of the handle, the other wire has a hole drilled the bottom of the case, and a knot to keep the wire from being inadvertly pulled out, then attached an insulated alligator clip, this is a must as all the static charge does not drop off. I like to use instrument test lead wire for any wire that will requires constant flexibility so it wont break.
0 comments