John Warren's Album: Static grass applicator

Photo 2 of 5 in Static grass applicator

Strainer mods.
After breaking the plastic handle off the strainer, I bent the two handle rod straight, then bent them so that they wrap around the plastic dowel mounts and bent the ends down so that it would lay flat against the bottom of the handle, creating the strainers strength. I also used a dremel to route the end of the handle to fit the rods of the strainer handle. It actually stayed in place very ridged. No need for any epoxy
i HAVE SCRAPPED THE STRAINER AND DIRECTLY WIREDED TO A BETTER APPLICATOR THAT GOS ON THE BOTTLE OF GRASS DIRECTLY.
0 comments